Record-low price alert: Bambu Lab P1S Combo $50 off

As of August 20, 2026, the Bambu Lab P1S Combo 3D printer is $499.99 at Amazon—a record-low after a $50 cut from $549. This recordlow price alert the 9% discount marks its best-ever listing for shoppers hunting a capable enclosed printer. Deal pricing and availability can change after publication, so the window may not last.

Key Takeaways

• The Bambu Lab P1S Combo is $499.99 at Amazon as of August 20, 2026, down from $549.
• The cut is about $50, or roughly 9% off the list price, and Mashable calls it the best-ever price.
• The Combo supports multi-color and multi-material printing with up to 16 colors via a Bambu Lab AMS.
• It prints at up to 500 mm/s with 20,000 mm/s² acceleration and sets up in about 15 minutes.
• Supported filaments include PLA, PETG, TPU, PVA, PET, ABS, ASA, plus PA and PC; carbon and glass fiber-reinforced polymers are not recommended.

What is the current Bambu Lab P1S Combo deal at Amazon?

According to Mashable’s August 20 deal report, the Bambu Lab P1S Combo is on sale for $499.99 at Amazon. That figure sits $50 below the $549 list price, which Mashable frames as a 9% discount and the printer’s best-ever price.

If you have been watching 3D printer pricing, the headline is simple: this is the moment the Combo has hit its lowest Amazon mark covered in that alert. Mashable also notes that deal pricing and availability are subject to change after the time of publication, which is standard for retail flash cuts.

For readers who follow BlasterPost’s Nostalgia: Then & Now coverage, the story is less about nostalgia for a specific old model and more about how quickly a once-specialist tool can land in a mainstream cart when the price finally breaks lower.

Why does a record-low P1S Combo price matter for makers?

Record lows matter because they remove the usual wait-and-see friction. Mashable positions the P1S Combo as a strong pick for anyone hunting a 3D printer deal right now, especially shoppers who want multi-color and multi-material work without building a custom workflow from scratch.

When connected to a Bambu Lab AMS, the printer supports multi-color and multi-material printing with up to 16 different colors. That capability is the practical “why it matters” for makers who want detailed, colorful designs rather than single-filament prototypes alone.

Speed is the other half of the value case. Mashable cites printing speeds of up to 500 mm/s and acceleration of 20,000 mm/s², which can significantly cut time spent waiting for prints to finish. Less idle time means more room to iterate on new designs while the hardware is still on a rare discount.

The fully enclosed design is also called out as a performance helper. Enclosures are not a fashion detail here; Mashable ties the closed body to improved print performance, which pairs with the Combo’s beginner-minded setup story.

How beginner-friendly is the Bambu Lab P1S Combo?

Then-and-now consumer tech often hinges on whether a category still feels intimidating. Mashable’s report stresses that the P1S Combo can be set up in about 15 minutes, with a user-friendly design that keeps assembly straightforward.

You do not need to be an expert or bring advanced 3D-printer experience to get started, per that same coverage. The machine is framed as suitable for complete beginners, which is the bridge between “I might try this someday” and “I can unbox it tonight.”

That accessibility angle is why a $50, 9% cut lands as more than a coupon line. At $499.99 versus $549, the Combo is priced closer to an impulse upgrade for hobbyists who already wanted enclosed, faster printing but hesitated at the prior list.

Still, beginners should treat the Amazon listing as time-sensitive. Mashable’s disclaimer is clear: pricing and stock can move after publication, so the record-low claim is tied to the August 20 snapshot, not a permanent shelf price.

What filaments and features does the P1S Combo support?

Material flexibility is where the Combo earns its keep for mixed projects. Supported filaments listed by Mashable include PLA, PETG, TPU, PVA, PET, ABS, and ASA. PA and PC are also supported.

Carbon and glass fiber-reinforced polymers are not recommended. That limit is useful shopping context: the deal is strong for common maker filaments and many engineering plastics, but it is not a green light for every reinforced stock on the shelf.

Feature-wise, the Combo’s pitch in the Mashable write-up clusters around three practical wins: AMS-enabled color and material variety, high speed and acceleration, and a fully enclosed chassis. Add the roughly 15-minute setup claim, and the package reads as a turnkey path into multi-material printing rather than a weekend of calibration homework.

If your goal is colorful miniatures, functional PETG parts, or flexible TPU experiments, the supported-filament list covers the usual starters. If you need fiber-reinforced polymers, Mashable’s guidance says this is not the recommended route—even at a record-low sticker.

Should you buy the Bambu Lab P1S Combo during this Amazon cut?

Buy if you already wanted an enclosed, faster printer and the $499.99 Amazon price clears your budget line. Mashable’s “best-ever price” framing plus the $50 / 9% savings from $549 is the cleanest signal in the August 20 alert.

Wait or shop elsewhere only if you specifically need carbon or glass fiber-reinforced filaments, which are not recommended on this machine, or if Amazon’s live price has already moved since publication. Deals of this type can bounce, and Mashable flags that risk explicitly.

For everyone else watching 3D printer pricing, the actionable takeaway is narrow and sourced: as of August 20, the Bambu Lab P1S Combo’s Amazon listing at $499.99 is the record-low price alert worth checking before the discount disappears.